Showing posts with label fstab. Show all posts
Showing posts with label fstab. Show all posts

Wednesday, November 26, 2014

fstab file format

The /etc/fstab file can be used to define how disk partitions, various other block devices, or remote filesystems should be mounted into the filesystem.
Each filesystem is described in a separate line. These definitions will be converted into systemd mount units dynamically at boot, and when the configuration of the system manager is reloaded. The default setup will automatically fsck and mount filesystems before starting services that need them to be mounted. For example, systemd automatically makes sure that remote filesystem mounts like NFS or Samba are only started after the network has been set up. Therefore, local and remote filesystem mounts specified in /etc/fstab should work out of the box. See man 5 systemd.mount for details.
The mount command will use fstab, if just one of either directory or device is given, to fill in the value for the other parameter. When doing so, mount options which are listed in fstab will also be used.
File example
A simple /etc/fstab, using kernel name descriptors:
/etc/fstab
# <file system>        <dir>         <type>    <options>             <dump> <pass>
/dev/sda1              /             ext4      defaults,noatime      0      1
/dev/sda2              none          swap      defaults              0      0
/dev/sda3              /home         ext4      defaults,noatime      0      2

Field definitions
Each line in the /etc/fstab file contains the following fields separated by spaces or tabs:
file_system    dir    type    options    dump    pass
file system
The partition or storage device to be mounted.
dir
The mountpoint where <file system> is mounted to.
type
The file system type of the partition or storage device to be mounted. Many different file systems are supported: ext2, ext3, ext4, btrfs, reiserfs, xfs, jfs, smbfs, iso9660, vfat, ntfs, swap and auto. The auto type lets the mount command guess what type of file system is used. This is useful for optical media (CD/DVD).
options
Mount options of the filesystem to be used. See the mount man page. Please note that some options are specific to filesystems; to discover them see below in the aforementioned mount man page.
dump
Used by the dump utility to decide when to make a backup. Dump checks the entry and uses the number to decide if a file system should be backed up. Possible entries are 0 and 1. If 0, dump will ignore the file system; if 1, dump will make a backup. Most users will not have dump installed, so they should put 0 for the dump entry.
pass
Used by fsck to decide which order filesystems are to be checked. Possible entries are 0, 1 and 2. The root file system should have the highest priority 1 (unless its type is btrfs, in which case this field should be 0) - all other file systems you want to have checked should have a 2. File systems with a value 0 will not be checked by the fsck utility.


Identifying filesystems

There are different ways to identify filesystems that will be mounted. /etc/fstab does support several methods: kernel name descriptor, label or UUID, and GPT labels and UUID for GPT disks. UUID must be privileged over kernel name descriptors and labels. See Persistent block device naming for more explanations. It is recommended to read that article first before continuing with this article.
In this section, we will describe how to mount filesystems using all the mount methods available via examples. The output of the commands lsblk -f and blkid used in the following examples are available in the article Persistent block device naming. If you have not read that article yet, please read it now.

Kernel name descriptors

Run lsblk -f to list the partitions and prefix the values in the NAME column with /dev/.
/etc/fstab
# <file system> <dir> <type> <options>                                                                                            <dump> <pass>
/dev/sda1       /boot vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0      2
/dev/sda2       /     ext4   rw,relatime,discard,data=ordered                                                                     0      1
/dev/sda3       /home ext4   rw,relatime,discard,data=ordered                                                                     0      2
/dev/sda4       none  swap   defaults                                                                                             0      0

Labels

Run lsblk -f to list the partitions, and prefix the values in the LABEL column with LABEL=:
/etc/fstab
# <file system> <dir> <type> <options>                                                                                            <dump> <pass>
LABEL=EFI       /boot vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0      2
LABEL=SYSTEM    /     ext4   rw,relatime,discard,data=ordered                                                                     0      1
LABEL=DATA      /home ext4   rw,relatime,discard,data=ordered                                                                     0      2
LABEL=SWAP      none  swap   defaults                                                                                             0      0
Note: If any of your fields contains spaces, see #Filepath spaces.

UUIDs

Run lsblk -f to list the partitions, and prefix the values in the UUID column with UUID=:
/etc/fstab
# <file system>                           <dir> <type> <options>                                                                                            <dump> <pass>
UUID=CBB6-24F2                            /boot vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0      2
UUID=0a3407de-014b-458b-b5c1-848e92a327a3 /     ext4   rw,relatime,discard,data=ordered                                                                     0      1
UUID=b411dc99-f0a0-4c87-9e05-184977be8539 /home ext4   rw,relatime,discard,data=ordered                                                                     0      2
UUID=f9fe0b69-a280-415d-a03a-a32752370dee none  swap   defaults                                                                                             0      0
Tip: If you would like to return just the UUID of a specific partition: $ lsblk -no UUID /dev/sda2

GPT labels

Run blkid to list the partitions, and use the PARTLABEL values without the quotes:
/etc/fstab
# <file system>                      <dir> <type> <options>                                                                                            <dump> <pass>
PARTLABEL=EFI\040SYSTEM\040PARTITION /boot vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0      2
PARTLABEL=GNU/LINUX                  /     ext4   rw,relatime,discard,data=ordered                                                                     0      1
PARTLABEL=HOME                       /home ext4   rw,relatime,discard,data=ordered                                                                     0      2
PARTLABEL=SWAP                       none  swap   defaults                                                                                             0      0
Note: If any of your fields contains spaces, see #Filepath spaces.

GPT UUIDs

Run blkid to list the partitions, and use the PARTUUID values without the quotes:
/etc/fstab
# <file system>                               <dir> <type> <options>                                                                                            <dump> <pass>
PARTUUID=d0d0d110-0a71-4ed6-936a-304969ea36af /boot vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0      2
PARTUUID=98a81274-10f7-40db-872a-03df048df366 /     ext4   rw,relatime,discard,data=ordered                                                                     0      1
PARTUUID=7280201c-fc5d-40f2-a9b2-466611d3d49e /home ext4   rw,relatime,discard,data=ordered                                                                     0      2
PARTUUID=039b6c1c-7553-4455-9537-1befbc9fbc5b none  swap   defaults                                                                                             0      0

Tips and tricks

Automount with systemd

If you have a large /home partition, it might be better to allow services that do not depend on /home to start while /home is checked by fsck. This can be achieved by adding the following options to the /etc/fstab entry of your /home partition:
noauto,x-systemd.automount
This will fsck and mount /home when it is first accessed, and the kernel will buffer all file access to /home until it is ready.
Note: This will make your /home filesystem type autofs, which is ignored by mlocate by default. The speedup of automounting /home may not be more than a second or two, depending on your system, so this trick may not be worth it.
The same applies to remote filesystem mounts. If you want them to be mounted only upon access, you will need to use the noauto,x-systemd.automount parameters. In addition, you can use the x-systemd.device-timeout=# option to specify a timeout in case the network resource is not available.
Note: If you intend to use the exec flag with automount, you should remove the user flag for it to work properly as found in the course of a Fedora Bug Report
If you have encrypted filesystems with keyfiles, you can also add the noauto parameter to the corresponding entries in /etc/crypttab. systemd will then not open the encrypted device on boot, but instead wait until it is actually accessed and then automatically open it with the specified keyfile before mounting it. This might save a few seconds on boot if you are using an encrypted RAID device for example, because systemd does not have to wait for the device to become available. For example:
/etc/crypttab
data /dev/md0 /root/key noauto

Filepath spaces

Since spaces are used in fstab to delimit fields, if any field (PARTLABEL, LABEL or the mount point) contains spaces, these spaces must be replaced by escape characters \ followed by the 3 digit octal code 040:
/etc/fstab
UUID=47FA-4071     /home/username/Camera\040Pictures   vfat  defaults,noatime       0  0
/dev/sda7          /media/100\040GB\040(Storage)       ext4  defaults,noatime,user  0  2

External devices

External devices that are to be mounted when present but ignored if absent may require the nofail option. This prevents errors being reported at boot.
/etc/fstab
/dev/sdg1        /media/backup    jfs    defaults,nofail    0  2

Reference: https://wiki.archlinux.org/index.php/Fstab