Showing posts with label mount. Show all posts
Showing posts with label mount. Show all posts

Tuesday, September 8, 2015

How to mount NFS file systems on Rhel6 ?


mount -t nfs <IP Address>:/<Share Directory>    /mnt/

What all this means:

-t : Is used to tell the system that this is just an ordinary mount command. You use this when you do not have the drive information located in /etc/fstab
nfs : Tells the type of share you are trying to mount.
<IP Address>:/ : IP address of the drive you are trying to mount.
<share directory> : The Share within the Volume of the hard drive that you want to mount.
/mnt  : The location to which you want your share to be mounted.

Temporary Mount

example:

mount -t nfs 192.168.1.108:/data     /mnt/data

permanent Mount 

Open /etc/fstab

vim /etc/fstab
Ipaddress:/sharename   mount_point filesystem type defaults 0 0

example:

192.168.1.108:/data     /mnt      nfs  defaults 0 0

save and exit
wq:

mount -a


Troubleshooting NFS

showmount -e <IPaddress>
showmount  -e 192.168.1.108
The -e stands for "exports" or a list of shares exported by NFS.

Monday, January 12, 2015

How to mount DVD or CDROM in Linux



DVDROM (Digital Versatile Disk Read-only memory) and CDROM (Compact Disc Read-only memory) are optical storage devices to store your data for future uses or for backups. May people use these disks to store movies, photos etc. By default many older Linux machines will not allow you to see the content of them. This is due that, they are not mounted by default in your box. We have to mount them properly so that we can access their content.

There are many ways to do mounting CDROM/DVDROM’s. One of the classic way is to use mount command which is available in Linux. Before mounting a CDROM or DVDROM we have to check what hardware file corresponding to our disk drive. If you have DVD Drive then you should see /dev/dvdrom or /dvd-rw file. If you have CDrom then you should find /dev/cdrom or /dev/cd-rw file. 

Once you are conformed about your device, you can use any one command mention below depending on your device name.

If your device is only CD reader use below command
mount -t iso9660 /dev/cdrom /media/

If your device is a CD readwrite use below command
mount -t iso9660 /dev/cdrw /media/

If your device is a DVD reader use below command
mount -t iso9660 /dev/dvdrom /media/

If your device is a DVD writer use below command
mount -t iso9660 /dev/dvd-rw /media/

Let us see what this command means.

mount is the command to mount devices files etc in a Linux/Unix box.
-t is the option to specify the format of the device, here it is iso9660 format. This is the format how data is written on to the device.

/dev/dvd-rw is a DVD writer present in your machine

/media is the point where you are going to mount your device. once you cd to /media you can see the contact of DVD.

Note:Some times you will not see /dev/cdrom or cdrw or dvd or dvd-rw files. At this time you have to know that it is associated with /dev/hdb or hdc etc.
We can do permanent mounting by using fstab file.

Sunday, November 30, 2014

mount command examples in linux



Once you insert new hard disks into your system, you’ll typically use utilities like fdisk or parted to create partitions. Once you create a partition, you’ll use mkfs command to create ext2, ext3, or ext4 partition.
Once you create a partition, you should use mount command to mount the partition into a mount point (a directory), to start using the filesystem.
he general mount command syntax to mount a device:
mount -t type device destination_dir

1. Mount a CD-ROM
The device file for CD would exist under /dev directory. For example, a CD-ROM device will be mounted as shown below.
# mount -t iso9660 -o ro /dev/cdrom /mnt
In the above example, the option “-o ro” indicates that the cdrom should be mounted with read-only access. Also, make sure that the destination directory (in the above example, /mnt) exist before you execute the mount command.

2. View All Mounts

After you execute mount a partition or filesystem, execute the mount command without any arguments to view all the mounts.
In the example below, after mounting the USB drive on a system, the output of mount looks like the below. As seen below, the USB device (i.e:/dev/sdb) is mounted on /media/myusb, which is displayed as the last line in the mount command.

# mount
/dev/sda5 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
/dev/sda6 on /mydata type ext2 (rw)
/dev/sda7 on /backup type vfat (rw)
gvfs-fuse-daemon on /home/bala/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=bala)
/dev/sdb on /media/myusb type vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks)

You can also use df command to view all the mount points.

# df
Filesystem     1K-blocks      Used Available Use% Mounted on
/dev/sda5      195069136 128345036  56958520  70% /
udev             2008336         4   2008332   1% /dev
tmpfs             806244       928    805316   1% /run
none                5120         0      5120   0% /run/lock
none             2015604       228   2015376   1% /run/shm
/dev/sda6       17729076    176200  16657596   2% /mydata
/dev/sda7       11707200    573312  11133888   5% /backup
/dev/sdb         3910656   2807160   1103496  72% /media/myusb

3. Mount all the filesystem mentioned in /etc/fstab

The filesystems listed in /etc/fstab gets mounted during booting process. After booting, system administrator may unmount some of the partitions for various reasons. If you want all the filesystems to be mounted as specified in /etc/fstab, use -a option with mount as shown below:

Example /etc/fstab file entries:

# cat /etc/fstab
#
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sda5 during installation
/dev/sda5 /               ext4    errors=remount-ro 0       1
# /mydata was on /dev/sda6 during installation
/dev/sda6 /mydata         ext2    defaults        0       2
# /backup was on /dev/sda7 during installation
/dev/sda7 /backup         vfat    defaults        0       3

Execute mount command with -a option to mount all the /etc/fstab entries.

# mount -a

# mount
/dev/sda5 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
/dev/sda6 on /mydata type ext2 (rw)
/dev/sda7 on /backup type vfat (rw)
gvfs-fuse-daemon on /home/bala/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=bala)

The same -a option can be used with umount to unmount all the filesystems mentioned in /etc/mtab

# umount -a
umount: /run/shm: device is busy.
        (In some cases useful info about processes that use
         the device is found by lsof(8) or fuser(1))
umount: /run: device is busy.
        (In some cases useful info about processes that use
         the device is found by lsof(8) or fuser(1))
umount: /dev: device is busy.
        (In some cases useful info about processes that use
         the device is found by lsof(8) or fuser(1))
umount: /: device is busy.
        (In some cases useful info about processes that use
         the device is found by lsof(8) or fuser(1))

Some filesystem are not unmounted as its busy or currently in use. Note that the files /etc/mtab and /proc/mounts contents would be similar.

4. Mount only a specific filesystem from /etc/fstab

When you pass only the directory name to mount, it looks for mount point entries, if not found, then search continuous for a device in /etc/fstab and gets mounted.

# mount | grep /mydata

# cat /etc/fstab | grep mydata
##########/mydata was on /dev/sda6 during installation##########
 /dev/sda6 /mydata         ext2    defaults        0       2

As seen above, /mydata directory is not a mountpoint, but it is present in /etc/fstab.

# mount /mydata

# mount | grep /mydata
/dev/sda6 on /mydata type ext2 (rw)

If you execute the same again, you would get the error message as follows:

# mount /mydata
mount: /dev/sda6 already mounted or /mydata busy
mount: according to mtab, /dev/sda6 is already mounted on /mydata

Here you may also pass the device name instead of directory name (to be picked up from /etc/fstab file).

# mount /dev/sda6

Note that the files /etc/mtab and /proc/mounts contents would be similar.

5. View all mounted partitions of specific type

It is possible to list only the specific type of filesystem mounted using the option -l with -t as shown below:

# mount -l -t ext2
/dev/sda6 on /mydata type ext2 (rw)

# mount -l -t ext4
/dev/sda5 on / type ext4 (rw,errors=remount-ro)

As seen above, /dev/sda6 is the only ext2 partition and /dev/sda5 is the only ext4 partition accordingly.

6. Mount a Floppy Disk

The device file for floppy disk would exist under /dev directory. For example, a floppy disk will be mounted as shown below.

# mount /dev/fd0 /mnt
# cd /mnt

After the successful mount, you would be able to access the contents of the floppy disk. Once you are done with it, use umount before you physically remove the floppy disk from the system.

# umount /mnt

7. Bind mount points to a new directory

The mountpoint can be binded to a new directory. So that you would be able to access the contents of a filesystem via more than one mountpoints at the same time.

Use -B option with olddir and newdir to be binded as follows,

# mount -B /mydata /mnt

Now the bind is done and you might verify it as follows,

# mount | grep /mydata
/dev/sda6 on /mydata type ext2 (rw)
/mydata on /mnt type none (rw,bind)

As seen above the bind is done properly. So when you do modification in filesystem in one place, you can see those reflection of it in other mount point as shown below:

# cd /mydata
# ls
test
# mkdir dir1
# mkdir dir2
# ls
test    dir1    dir2
# cd /mnt
# ls
test    dir1    dir2


8. Access contents from new mount point

Mount allows you to access the contents of a mount point from a new mount point. Its nothing but move a mounted tree to another place.

In the example below, the mount point /mydata will be accessed from /mnt using the option -M as shown below:

# mount -M /mydata /mnt/

Once its done, you cant use the old mount point as its moved to a new mount point and this can be verified as shown below:

# mount | grep /mydata
# mount | grep /mnt
/dev/sda6 on /mnt type ext2 (rw)

9. Mount without writing entry into /etc/mtab

During read only mount of /etc/, the /etc/mtab file entries cannot be modified by mount command. However, mount can be done without writing into /etc/mtab by using the option -n as follows,

# mount -n /dev/sda6 /mydata

You cannot see any entry for this /mydata in mount command output and as well from /etc/mtab file as follows:

# mount | grep /mydata
# cat /etc/mtab | grep /mydata

Access the contents of a mounted directory /mydata:

# cd /mydata
# ls
dir1  dir2  test

10. Mount filesystem with read or read/write access

To mount partition as read only, use -r option which is synonym to -o ro.

# mount /dev/sda6 /mydata -r
# mount  | grep /mydata
/dev/sda6 on /mydata type ext4 (ro)

ext3 and ext4 filesystem would still allow you to do write operation when the filesystem is dirty. So, you may have to use “ro,noload” to prevent these kind of write operation.

# mount /dev/sda6 /mydata -t ext4 -o ro -o noload
# mount | grep /mydata
/dev/sda6 on /mydata type ext4 (ro,noload)

To mount a partition with read/write access, use -w option which is same as “-o rw” (i.e : default).

11. Remount the mounted filesystem

In order to mount the already mounted filesystem, use remount option and its normally used to remount the filesystem with read/write access when its previously mounted with read access.

The /mydata mount point is going to be remounted with read/write access from read access as shown below:

# mount | grep /mydata
/dev/sda6 on /mydata type ext4 (ro,noload)
# mount -o remount,rw /mydata
# mount | grep /mydata
/dev/sda6 on /mydata type ext4 (rw)

12. Mount an iso image into a directory

The iso image can be mounted as shown below:

# mount -t iso9660 -o loop pdf_collections.iso /mnt
# cd /mnt
# ls
perl/    php/    mysql/

13. Unmount more than one mount points

Umount allows you to unmount more than mount point in a single execution of umount of command as follows:

# umount /mydata  /backup
# mount | grep /mydata
# mount | grep /backup

14. Lazy unmount of a filesystem

This is a special option in umount, in case you want to unmount a partition after disk operations are done. You can issue command umount -l with that partition and the unmount will be done after the disk operations gets finished.

For instance, consider a scenario that a task (i.e: script or any other command) is doing a copy operation on a disk and at the same time you are allowed to issue a unmount with -l, so that unmount would be done once the copy is over (i.e: the disk operation).

# umount /mydata -l

15. Forcefully unmount a filesystem

umount provides the option to forcefully unmount a filesystem with option -f when the device is busy as shown below:

# umount -f /mnt

If this doesn’t work for you, then you can go for lazy unmount.

Meanwhile, you can also have a look at ps command output that which process is presently using the mountpoint as shown below:

# ps ajx | grep /mydata
 2540  3037  3037  2468 pts/2     3037 D+       0   0:00 cp -r /home/geekstuff/ProjectData/ /mydata

You can also execute fuser command to find out which process is holding the directory for operations.

# fuser -cu /mydata
/mydata:              3087(root)

It gives you the process id with username (nothing but the owner of the process). If you know what that process is, you may want to stop that process and then try the umount again.